*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 16 Feb 2004 13:00:06 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 16 Feb 2004 13:00:57 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040216 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.20 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040216 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1749.1 1749.9 818.1 0.11 0.04 2.14 2 1.54 3492.4 3493.1 1648.0 -0.06 -0.08 2.12 3 3.08 6985.7 6984.0 3302.9 -0.06 -0.10 2.12 4 4.62 10478.1 10477.9 4995.5 -0.05 -0.05 2.10 5 6.93 15702.2 15704.1 7893.5 -0.16 -0.13 1.99 6 9.23 20955.7 20957.1 10335.3 -0.07 -0.05 2.03 7 11.54 26213.3 26215.8 12855.4 0.01 0.04 2.04 8 15.39 34959.3 34959.9 18258.0 0.03 0.05 1.91 9 19.23 43741.2 43740.5 21835.9 0.13 0.14 2.00 10 23.08 52488.6 52492.7 26435.2 0.12 0.15 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3442 to 103280 e- Average count rate measured: 2271 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.97 +/- 0.02 e-/ADU RON = 3.67 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay