*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 08 Feb 2004 13:25:59 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 08 Feb 2004 13:26:47 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040208 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.82 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040208 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1761.2 1760.0 834.3 -0.00 0.02 2.11 2 1.54 3519.2 3519.8 1635.4 -0.03 0.03 2.15 3 3.08 7034.6 7035.1 3446.9 -0.09 -0.07 2.04 4 4.62 10554.5 10554.4 5017.7 -0.03 -0.03 2.10 5 6.93 15811.4 15811.7 7603.4 -0.15 -0.16 2.08 6 9.23 21106.8 21105.9 10439.6 -0.04 -0.06 2.02 7 11.54 26390.7 26392.9 13153.7 0.00 -0.01 2.01 8 15.39 35215.0 35211.4 17994.6 0.07 0.04 1.96 9 19.23 44015.0 44018.0 21759.2 0.07 0.06 2.02 10 23.08 52883.3 52888.5 26438.9 0.20 0.18 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3500 to 105134 e- Average count rate measured: 2287 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.72 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.19/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay