*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 01 Feb 2004 17:50:54 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 01 Feb 2004 17:51:54 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040201 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.37 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040201 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1685.5 1685.6 766.0 0.04 0.04 2.20 2 1.54 3368.7 3368.9 1573.2 -0.02 -0.02 2.14 3 3.08 6733.6 6736.8 3135.5 -0.10 -0.08 2.15 4 4.62 10106.0 10105.5 5009.0 -0.04 -0.04 2.02 5 6.93 15143.7 15140.8 7552.4 -0.15 -0.17 2.01 6 9.23 20210.0 20209.6 10396.9 -0.06 -0.06 1.94 7 11.54 25274.7 25274.2 12618.4 0.00 -0.00 2.00 8 15.39 33719.5 33723.0 16992.3 0.05 0.06 1.98 9 19.23 42168.5 42165.8 21206.9 0.10 0.09 1.99 10 23.08 50643.9 50650.0 25031.9 0.18 0.19 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3364 to 101084 e- Average count rate measured: 2191 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.01 e-/ADU RON = 3.72 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.19/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay