*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 16 Jan 2004 12:33:23 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 16 Jan 2004 12:34:10 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040116 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.82 stddev = 1.90 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040116 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1758.1 1757.5 823.8 0.03 0.05 2.13 2 1.54 3509.1 3507.8 1669.6 -0.05 -0.09 2.10 3 3.08 7013.2 7017.1 3354.2 -0.11 -0.07 2.09 4 4.62 10523.4 10524.5 5027.2 -0.05 -0.05 2.09 5 6.93 15770.5 15772.8 7862.7 -0.14 -0.14 2.01 6 9.23 21044.4 21047.4 10666.3 -0.06 -0.05 1.97 7 11.54 26328.9 26327.7 12903.2 0.04 0.03 2.04 8 15.39 35113.5 35112.7 17667.7 0.06 0.05 1.99 9 19.23 43918.9 43918.1 21209.2 0.12 0.11 2.07 10 23.08 52722.7 52724.8 26955.8 0.16 0.16 1.96 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3491 to 104715 e- Average count rate measured: 2281 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.03 e-/ADU RON = 3.77 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay