*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 09 Jan 2004 15:14:35 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 09 Jan 2004 15:15:26 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040109 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.47 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040109 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1694.5 1696.1 784.1 0.08 0.11 2.16 2 1.54 3384.9 3383.9 1605.6 -0.04 -0.06 2.11 3 3.08 6769.0 6769.4 3188.2 -0.08 -0.08 2.12 4 4.62 10157.2 10153.6 4972.9 -0.04 -0.06 2.04 5 6.93 15219.2 15216.7 7435.8 -0.15 -0.15 2.05 6 9.23 20308.1 20305.6 9984.4 -0.07 -0.07 2.03 7 11.54 25403.5 25404.1 12670.8 0.01 0.02 2.00 8 15.39 33881.7 33877.4 16524.9 0.03 0.03 2.05 9 19.23 42389.7 42387.4 21527.5 0.12 0.13 1.97 10 23.08 50873.1 50870.0 24889.4 0.14 0.14 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3409 to 102289 e- Average count rate measured: 2201 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.02 e-/ADU RON = 3.78 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay