*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 02 Jan 2004 15:31:07 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 02 Jan 2004 15:31:55 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040102 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.72 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_040102 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1749.3 1749.3 835.8 0.04 0.03 2.09 2 1.54 3491.3 3491.7 1687.5 -0.09 -0.07 2.07 3 3.08 6985.0 6984.7 3413.5 -0.05 -0.06 2.05 4 4.62 10472.4 10472.7 5079.2 -0.06 -0.06 2.06 5 6.93 15695.7 15695.6 7588.7 -0.14 -0.14 2.07 6 9.23 20942.1 20944.6 10489.2 -0.07 -0.06 2.00 7 11.54 26203.3 26202.1 12687.0 0.03 0.03 2.07 8 15.39 34938.4 34938.4 17143.3 0.03 0.04 2.04 9 19.23 43727.8 43721.1 21588.5 0.16 0.15 2.03 10 23.08 52456.2 52458.2 25901.6 0.13 0.14 2.03 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3540 to 106159 e- Average count rate measured: 2270 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.01 e-/ADU RON = 3.78 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.002 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay