*** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 15 Mar 2002 16:03:34 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 15 Mar 2002 16:04:13 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 020315 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.17 stddev = 2.50 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_020315 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1661.8 1660.5 776.5 0.12 0.11 2.14 2 8.23 3268.8 3267.0 1481.2 -0.09 -0.12 2.21 3 16.47 6492.2 6492.8 2992.7 -0.18 -0.15 2.17 4 24.70 9717.5 9719.0 4408.7 -0.14 -0.12 2.20 5 37.04 14555.4 14552.8 6711.1 -0.11 -0.12 2.17 6 49.39 19401.6 19403.5 9163.0 -0.07 -0.06 2.12 7 61.73 24248.5 24249.1 11190.0 -0.03 -0.02 2.17 8 82.31 32347.4 32346.8 14788.3 0.06 0.06 2.19 9 102.89 40470.7 40464.3 18709.2 0.18 0.16 2.16 10 123.46 48591.9 48588.2 22305.0 0.26 0.25 2.18 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3611 to 105623 e- Average count rate measured: 392 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.17 +/- 0.01 e-/ADU RON = 5.42 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.110 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.26/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay