*** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 22 Feb 2002 16:58:52 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 22 Feb 2002 16:59:29 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 020222 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.13 stddev = 2.50 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_020222 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1682.5 1679.4 773.5 0.14 0.10 2.18 2 8.23 3307.4 3309.3 1515.7 -0.16 -0.04 2.18 3 16.47 6575.1 6573.0 3018.5 -0.16 -0.17 2.18 4 24.70 9840.3 9840.5 4526.4 -0.15 -0.14 2.17 5 37.04 14740.4 14740.9 6744.4 -0.11 -0.11 2.19 6 49.39 19648.7 19644.5 9002.8 -0.07 -0.10 2.18 7 61.73 24560.3 24557.6 11279.5 -0.01 -0.03 2.18 8 82.31 32764.3 32765.7 15216.6 0.08 0.07 2.15 9 102.89 40987.4 40982.0 19006.5 0.18 0.16 2.16 10 123.46 49212.2 49216.3 22957.9 0.26 0.26 2.14 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3607 to 105600 e- Average count rate measured: 397 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.15 +/- 0.01 e-/ADU RON = 5.37 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.106 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.26/-0.17 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay