*** MIDAS logfile (vers. 01FEBpl1.1) *** We, 30 Jan 2002 15:24:33 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** We, 30 Jan 2002 15:25:14 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 020130 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.56 stddev = 2.50 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_020130 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1688.9 1686.0 776.6 0.15 0.11 2.17 2 8.23 3323.5 3324.0 1546.6 -0.14 -0.06 2.15 3 16.47 6606.8 6607.0 3019.4 -0.19 -0.16 2.19 4 24.70 9891.9 9891.5 4513.4 -0.15 -0.14 2.19 5 37.04 14819.9 14819.3 6789.8 -0.11 -0.11 2.18 6 49.39 19754.6 19756.8 9029.7 -0.07 -0.06 2.19 7 61.73 24695.9 24693.4 11322.8 -0.01 -0.02 2.18 8 82.31 32945.9 32937.4 15142.3 0.08 0.05 2.18 9 102.89 41209.3 41204.9 19046.4 0.17 0.16 2.16 10 123.46 49484.3 49479.9 22887.4 0.26 0.25 2.16 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3649 to 107015 e- Average count rate measured: 399 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.16 +/- 0.00 e-/ADU RON = 5.40 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.099 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.25/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay