*** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 30 Nov 2001 16:02:47 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 30 Nov 2001 16:03:25 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011130 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.47 stddev = 2.56 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_011130 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1741.9 1742.1 799.4 0.13 0.11 2.18 2 8.23 3415.1 3416.2 1568.1 -0.11 -0.09 2.18 3 16.47 6772.9 6775.8 3136.2 -0.18 -0.15 2.16 4 24.70 10132.0 10134.6 4648.5 -0.16 -0.14 2.18 5 37.04 15171.7 15170.5 7061.7 -0.12 -0.13 2.15 6 49.39 20222.2 20220.5 9329.0 -0.06 -0.08 2.17 7 61.73 25269.5 25272.4 11683.6 -0.03 -0.02 2.16 8 82.31 33712.5 33711.1 15366.4 0.08 0.07 2.19 9 102.89 42166.6 42165.4 19377.9 0.17 0.17 2.18 10 123.46 50634.4 50636.4 23643.0 0.27 0.27 2.14 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3761 to 109335 e- Average count rate measured: 409 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.16 +/- 0.01 e-/ADU RON = 5.52 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.138 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.27/-0.17 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay