*** MIDAS logfile (vers. 01FEBpl1.1) *** Mo, 12 Nov 2001 15:54:28 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Mo, 12 Nov 2001 15:55:12 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011112 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 579.25 stddev = 2.49 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_011112 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1754.0 1753.5 809.5 0.14 0.13 2.17 2 8.23 3449.5 3450.0 1571.1 -0.14 -0.11 2.20 3 16.47 6858.7 6855.4 3140.3 -0.14 -0.18 2.18 4 24.70 10259.5 10259.3 4731.1 -0.18 -0.17 2.17 5 37.04 15372.5 15370.2 7070.7 -0.12 -0.12 2.17 6 49.39 20493.4 20492.7 9373.3 -0.07 -0.06 2.19 7 61.73 25614.1 25612.0 11652.8 -0.02 -0.02 2.20 8 82.31 34170.6 34170.1 15725.7 0.07 0.08 2.17 9 102.89 42748.1 42746.2 19757.2 0.18 0.18 2.16 10 123.46 51330.2 51333.6 23547.5 0.27 0.28 2.18 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3813 to 111599 e- Average count rate measured: 414 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.17 +/- 0.01 e-/ADU RON = 5.42 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.107 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.27/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay