*** MIDAS logfile (vers. 01FEBpl1.1) *** We, 07 Nov 2001 15:01:56 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** We, 07 Nov 2001 15:02:36 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011107 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.68 stddev = 2.48 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_011107 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1765.7 1766.8 818.2 0.11 0.13 2.16 2 8.23 3454.3 3453.9 1588.6 -0.09 -0.12 2.17 3 16.47 6840.0 6840.7 3163.3 -0.19 -0.18 2.16 4 24.70 10228.7 10228.3 4710.0 -0.16 -0.16 2.17 5 37.04 15310.6 15311.2 7195.8 -0.12 -0.12 2.13 6 49.39 20404.7 20404.8 9439.5 -0.07 -0.07 2.16 7 61.73 25502.2 25500.5 12322.8 -0.01 -0.01 2.07 8 82.31 34013.7 34011.5 15991.7 0.08 0.08 2.13 9 102.89 42543.0 42535.9 20053.5 0.18 0.17 2.12 10 123.46 51076.4 51075.8 23495.4 0.26 0.27 2.17 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3788 to 109547 e- Average count rate measured: 412 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.14 +/- 0.02 e-/ADU RON = 5.32 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.161 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.27/-0.19 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay