*** MIDAS logfile (vers. 01FEBpl1.1) *** Tu, 23 Oct 2001 13:41:17 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Tu, 23 Oct 2001 13:41:58 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011023 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 579.09 stddev = 2.49 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_011023 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1768.4 1763.9 890.3 0.13 0.08 1.99 2 8.23 3472.3 3472.8 1597.4 -0.14 -0.04 2.17 3 16.47 6896.5 6897.9 3156.1 -0.16 -0.11 2.19 4 24.70 10316.8 10316.7 4806.3 -0.17 -0.16 2.15 5 37.04 15450.4 15454.9 7093.3 -0.14 -0.11 2.18 6 49.39 20599.4 20598.5 9538.2 -0.07 -0.08 2.16 7 61.73 25746.5 25747.3 11878.1 -0.01 -0.03 2.17 8 82.31 34345.5 34347.8 15601.3 0.08 0.06 2.20 9 102.89 42966.2 42962.7 20001.4 0.19 0.15 2.15 10 123.46 51592.9 51591.2 23749.0 0.28 0.25 2.17 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3835 to 112036 e- Average count rate measured: 416 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.17 +/- 0.01 e-/ADU RON = 5.42 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.117 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.26/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay