*** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 08 Sep 2001 17:38:07 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 08 Sep 2001 17:38:44 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010908 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 579.14 stddev = 2.49 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_010908 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1756.0 1755.2 813.7 0.15 0.14 2.16 2 8.23 3449.6 3447.4 1574.2 -0.12 -0.16 2.19 3 16.47 6848.2 6850.1 3118.2 -0.20 -0.16 2.20 4 24.70 10249.8 10251.3 4717.4 -0.16 -0.14 2.17 5 37.04 15354.2 15351.6 7075.7 -0.11 -0.12 2.17 6 49.39 20466.2 20465.6 9415.3 -0.07 -0.07 2.17 7 61.73 25580.3 25580.6 11768.8 -0.01 -0.01 2.17 8 82.31 34121.1 34125.0 16252.0 0.07 0.08 2.10 9 102.89 42686.6 42678.6 19817.2 0.18 0.16 2.15 10 123.46 51258.9 51256.9 23574.7 0.27 0.27 2.17 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3780 to 110373 e- Average count rate measured: 414 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.15 +/- 0.02 e-/ADU RON = 5.35 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.118 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.27/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay