*** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 30 Aug 2001 14:42:58 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 30 Aug 2001 14:43:43 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010830 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.53 stddev = 2.51 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_010830 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1778.8 1778.4 819.9 0.14 0.14 2.17 2 8.23 3475.3 3474.7 1575.2 -0.12 -0.13 2.21 3 16.47 6882.7 6881.7 3131.3 -0.17 -0.18 2.20 4 24.70 10287.9 10291.1 4745.4 -0.17 -0.14 2.17 5 37.04 15402.9 15402.1 7022.0 -0.11 -0.11 2.19 6 49.39 20522.9 20523.5 9462.1 -0.07 -0.07 2.17 7 61.73 25644.0 25646.0 11780.4 -0.03 -0.02 2.18 8 82.31 34209.5 34204.7 15643.9 0.08 0.07 2.19 9 102.89 42788.6 42782.7 19773.6 0.18 0.17 2.16 10 123.46 51374.4 51372.8 23974.3 0.27 0.27 2.14 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3828 to 110566 e- Average count rate measured: 414 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.15 +/- 0.01 e-/ADU RON = 5.41 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.165 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.27/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay