*** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 23 Aug 2001 14:20:08 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 23 Aug 2001 14:20:52 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010823 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.68 stddev = 2.50 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_010823 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1792.4 1793.3 833.0 0.12 0.11 2.15 2 8.23 3525.1 3525.8 1611.0 -0.08 -0.08 2.19 3 16.47 7001.0 7001.4 3211.2 -0.15 -0.15 2.18 4 24.70 10474.8 10472.2 4770.8 -0.15 -0.17 2.20 5 37.04 15685.6 15687.8 7234.9 -0.14 -0.12 2.17 6 49.39 20912.7 20912.1 9648.3 -0.07 -0.07 2.17 7 61.73 26137.0 26137.0 12177.7 -0.03 -0.02 2.15 8 82.31 34869.2 34865.4 16330.4 0.07 0.07 2.14 9 102.89 43622.8 43614.8 20102.7 0.18 0.17 2.17 10 123.46 52374.9 52373.6 23942.0 0.26 0.26 2.19 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3893 to 113736 e- Average count rate measured: 423 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.17 +/- 0.01 e-/ADU RON = 5.44 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.116 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.26/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay