*** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 16 Aug 2001 14:25:38 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 16 Aug 2001 14:26:18 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010816 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.71 stddev = 2.50 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_010816 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1807.3 1807.4 824.5 0.12 0.13 2.19 2 8.23 3529.3 3528.2 1635.1 -0.11 -0.14 2.16 3 16.47 6987.2 6988.5 3224.3 -0.15 -0.13 2.17 4 24.70 10438.8 10442.1 4778.3 -0.19 -0.15 2.18 5 37.04 15628.8 15629.2 7122.6 -0.12 -0.11 2.19 6 49.39 20827.0 20826.8 9567.2 -0.06 -0.06 2.18 7 61.73 26023.8 26024.4 11900.4 -0.02 -0.01 2.19 8 82.31 34712.0 34707.1 15892.7 0.09 0.07 2.18 9 102.89 43412.4 43407.7 20304.4 0.18 0.17 2.14 10 123.46 52117.6 52112.4 24179.9 0.26 0.25 2.16 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3889 to 112131 e- Average count rate measured: 420 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.15 +/- 0.01 e-/ADU RON = 5.38 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.173 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.25/-0.17 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay