*** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 14 Jul 2001 18:53:09 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 14 Jul 2001 18:53:45 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010714 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.90 stddev = 2.48 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_010714 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1748.9 1747.5 813.1 0.14 0.11 2.15 2 8.23 3439.6 3441.8 1736.7 -0.14 -0.06 1.98 3 16.47 6837.6 6836.8 3119.6 -0.16 -0.17 2.19 4 24.70 10234.5 10230.9 4661.2 -0.14 -0.17 2.20 5 37.04 15328.9 15327.5 7009.3 -0.12 -0.13 2.19 6 49.39 20438.3 20436.9 9343.1 -0.06 -0.06 2.19 7 61.73 25541.7 25542.5 11703.8 -0.02 -0.02 2.18 8 82.31 34077.7 34075.1 15651.6 0.08 0.07 2.18 9 102.89 42623.6 42626.3 19714.2 0.16 0.17 2.16 10 123.46 51185.5 51186.5 23535.9 0.26 0.26 2.17 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3801 to 111297 e- Average count rate measured: 413 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.17 +/- 0.01 e-/ADU RON = 5.39 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.106 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.26/-0.17 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay