*** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 22 Jun 2001 14:36:39 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 22 Jun 2001 14:37:18 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010622 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 579.46 stddev = 2.49 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_010622 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1789.0 1790.9 821.6 0.11 0.09 2.18 2 8.23 3512.6 3514.8 1669.4 -0.06 -0.05 2.10 3 16.47 6966.8 6966.5 3135.8 -0.17 -0.19 2.22 4 24.70 10424.0 10423.2 4790.4 -0.14 -0.15 2.18 5 37.04 15604.5 15605.4 7152.6 -0.14 -0.13 2.18 6 49.39 20802.0 20800.1 9757.1 -0.07 -0.08 2.13 7 61.73 25997.1 25998.1 12021.4 -0.03 -0.02 2.16 8 82.31 34676.8 34678.6 16108.1 0.06 0.08 2.15 9 102.89 43381.5 43376.7 20253.7 0.17 0.17 2.14 10 123.46 52090.1 52083.6 23996.3 0.26 0.26 2.17 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3860 to 112312 e- Average count rate measured: 420 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.16 +/- 0.01 e-/ADU RON = 5.37 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.134 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.26/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay