*** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 14 Jun 2001 15:43:35 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 14 Jun 2001 15:44:11 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010614 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 578.82 stddev = 2.46 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_36_010614 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.12 1789.1 1789.3 824.5 0.08 0.09 2.17 2 8.23 3519.9 3519.3 1624.7 -0.05 -0.06 2.17 3 16.47 6990.4 6988.3 3225.0 -0.11 -0.14 2.17 4 24.70 10453.9 10456.7 5113.5 -0.16 -0.13 2.04 5 37.04 15657.6 15656.3 7236.4 -0.12 -0.13 2.16 6 49.39 20869.6 20868.9 9588.1 -0.09 -0.09 2.18 7 61.73 26084.1 26085.5 12097.6 -0.04 -0.03 2.16 8 82.31 34800.4 34799.2 16081.7 0.07 0.07 2.16 9 102.89 43531.8 43524.4 20016.6 0.17 0.15 2.17 10 123.46 52271.0 52270.9 23998.9 0.25 0.26 2.18 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3902 to 113997 e- Average count rate measured: 422 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.18 +/- 0.01 e-/ADU RON = 5.36 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.117 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.26/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay