*** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 22 Feb 2002 16:20:38 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 22 Feb 2002 16:21:15 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 020222 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 583.86 stddev = 2.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_020222 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1833.2 1835.8 760.6 0.33 0.33 2.41 2 10.00 3626.1 3628.0 1502.5 -0.26 -0.27 2.41 3 20.00 7220.0 7220.3 3030.6 -0.45 -0.47 2.38 4 30.00 10823.4 10821.3 4563.1 -0.42 -0.45 2.37 5 45.00 16239.0 16237.7 6869.2 -0.34 -0.35 2.36 6 60.00 21676.7 21676.7 9017.7 -0.20 -0.19 2.40 7 75.00 27130.1 27128.8 11519.5 -0.06 -0.05 2.36 8 100.00 36263.7 36264.3 15480.4 0.21 0.22 2.34 9 125.00 45439.7 45443.8 19520.3 0.46 0.49 2.33 10 150.00 54671.2 54671.2 23624.5 0.74 0.75 2.31 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4247 to 126562 e- Average count rate measured: 362 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.31 +/- 0.01 e-/ADU RON = 5.23 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.056 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.74/-0.46 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay