*** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 08 Dec 2001 16:10:54 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 08 Dec 2001 16:11:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011208 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 583.90 stddev = 2.27 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_011208 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1883.0 1883.9 782.3 0.31 0.33 2.41 2 10.00 3721.6 3720.7 1548.9 -0.24 -0.28 2.40 3 20.00 7402.9 7405.2 3085.3 -0.46 -0.44 2.40 4 30.00 11092.6 11096.3 4923.9 -0.46 -0.44 2.25 5 45.00 16648.0 16647.6 7023.4 -0.34 -0.35 2.37 6 60.00 22216.2 22219.0 9408.1 -0.22 -0.21 2.36 7 75.00 27809.5 27810.6 11773.6 -0.06 -0.06 2.36 8 100.00 37173.3 37169.9 16369.1 0.22 0.21 2.27 9 125.00 46588.7 46586.5 20097.3 0.50 0.49 2.32 10 150.00 56046.3 56042.0 24112.3 0.76 0.74 2.32 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4351 to 129486 e- Average count rate measured: 371 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.31 +/- 0.02 e-/ADU RON = 5.25 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.064 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.75/-0.45 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay