*** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 22 Nov 2001 16:46:20 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 22 Nov 2001 16:46:59 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011122 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 586.20 stddev = 2.27 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_011122 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1889.8 1890.7 794.0 0.27 0.31 2.38 2 10.00 3745.9 3742.6 1586.7 -0.14 -0.24 2.36 3 20.00 7449.6 7451.8 3067.3 -0.47 -0.44 2.43 4 30.00 11166.9 11167.1 4611.6 -0.46 -0.45 2.42 5 45.00 16758.8 16759.6 7122.5 -0.35 -0.34 2.35 6 60.00 22369.5 22370.3 9424.8 -0.22 -0.21 2.37 7 75.00 28000.9 27997.4 12009.0 -0.06 -0.07 2.33 8 100.00 37430.6 37432.4 15875.4 0.21 0.22 2.36 9 125.00 46904.6 46906.4 20001.8 0.47 0.48 2.35 10 150.00 56441.4 56432.8 24191.2 0.75 0.74 2.33 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4408 to 131616 e- Average count rate measured: 373 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.33 +/- 0.01 e-/ADU RON = 5.29 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.048 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.75/-0.46 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay