*** MIDAS logfile (vers. 01FEBpl1.1) *** We, 07 Nov 2001 14:23:34 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** We, 07 Nov 2001 14:24:15 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011107 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.06 stddev = 2.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_011107 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1914.7 1916.9 798.4 0.26 0.28 2.40 2 10.00 3778.7 3778.8 1635.1 -0.12 -0.16 2.31 3 20.00 7494.1 7496.2 3159.6 -0.47 -0.46 2.37 4 30.00 11226.4 11226.2 4695.9 -0.44 -0.46 2.39 5 45.00 16835.7 16836.2 7045.2 -0.36 -0.36 2.39 6 60.00 22466.0 22466.9 9511.3 -0.23 -0.22 2.36 7 75.00 28118.3 28117.2 11848.2 -0.07 -0.07 2.37 8 100.00 37580.2 37584.1 16123.9 0.20 0.22 2.33 9 125.00 47090.3 47089.8 20501.7 0.47 0.47 2.30 10 150.00 56659.7 56661.2 24673.4 0.75 0.76 2.30 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4394 to 129967 e- Average count rate measured: 375 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.29 +/- 0.01 e-/ADU RON = 5.19 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.099 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.75/-0.47 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay