*** MIDAS logfile (vers. 01FEBpl1.1) *** Tu, 30 Oct 2001 16:21:21 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Tu, 30 Oct 2001 16:21:59 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011030 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.31 stddev = 2.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_011030 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1905.0 1904.9 813.0 0.36 0.33 2.34 2 10.00 3755.7 3757.7 1566.0 -0.31 -0.27 2.40 3 20.00 7469.5 7468.2 3141.4 -0.48 -0.50 2.38 4 30.00 11192.9 11194.3 4678.5 -0.45 -0.44 2.39 5 45.00 16790.9 16794.2 7605.3 -0.36 -0.34 2.21 6 60.00 22413.6 22412.9 9391.9 -0.20 -0.21 2.39 7 75.00 28050.4 28049.7 11829.9 -0.06 -0.06 2.37 8 100.00 37496.4 37498.0 16065.3 0.23 0.23 2.33 9 125.00 46995.0 46988.8 20236.0 0.51 0.49 2.32 10 150.00 56535.1 56532.0 24568.0 0.77 0.76 2.30 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4401 to 130619 e- Average count rate measured: 374 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.31 +/- 0.02 e-/ADU RON = 5.23 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.078 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.77/-0.49 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay