*** MIDAS logfile (vers. 01FEBpl1.1) *** Tu, 23 Oct 2001 13:02:22 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Tu, 23 Oct 2001 13:03:04 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011023 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.19 stddev = 2.27 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_011023 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1924.3 1925.2 800.5 0.32 0.33 2.40 2 10.00 3801.3 3801.8 1570.3 -0.24 -0.24 2.42 3 20.00 7557.8 7557.6 3121.1 -0.50 -0.50 2.42 4 30.00 11328.7 11328.2 4772.7 -0.45 -0.46 2.37 5 45.00 16996.9 16995.4 7573.4 -0.36 -0.36 2.24 6 60.00 22686.1 22683.5 9527.0 -0.21 -0.22 2.38 7 75.00 28397.4 28392.9 12203.3 -0.05 -0.06 2.33 8 100.00 37958.8 37958.3 16126.1 0.22 0.23 2.35 9 125.00 47574.4 47570.4 20354.6 0.50 0.50 2.34 10 150.00 57236.3 57234.0 24645.7 0.77 0.77 2.32 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4478 to 133158 e- Average count rate measured: 378 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.33 +/- 0.01 e-/ADU RON = 5.28 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.069 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.77/-0.50 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay