*** MIDAS logfile (vers. 01FEBpl1.1) *** Mo, 08 Oct 2001 14:21:55 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Mo, 08 Oct 2001 14:22:33 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011008 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.81 stddev = 2.27 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_011008 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1932.6 1930.7 972.5 0.32 0.33 1.99 2 10.00 3798.9 3796.1 1588.3 -0.25 -0.27 2.39 3 20.00 7537.4 7537.0 3318.3 -0.46 -0.44 2.27 4 30.00 11283.5 11283.6 4668.2 -0.47 -0.45 2.42 5 45.00 16921.5 16920.1 7023.0 -0.36 -0.36 2.41 6 60.00 22581.1 22579.0 9531.5 -0.21 -0.21 2.37 7 75.00 28258.6 28259.2 11953.7 -0.06 -0.05 2.36 8 100.00 37767.2 37764.1 16104.7 0.22 0.21 2.35 9 125.00 47331.4 47326.3 20347.3 0.50 0.49 2.33 10 150.00 56933.2 56930.1 24819.8 0.76 0.75 2.29 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4463 to 131541 e- Average count rate measured: 376 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.31 +/- 0.02 e-/ADU RON = 5.24 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.115 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.76/-0.46 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay