*** MIDAS logfile (vers. 01FEBpl1.1) *** Mo, 01 Oct 2001 01:18:16 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Mo, 01 Oct 2001 01:18:54 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 011001 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.48 stddev = 2.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_011001 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1936.2 1937.3 804.5 0.30 0.32 2.41 2 10.00 3803.5 3802.5 1589.6 -0.19 -0.24 2.39 3 20.00 7536.3 7536.4 3156.8 -0.47 -0.47 2.39 4 30.00 11279.0 11283.0 4766.0 -0.47 -0.44 2.37 5 45.00 16914.1 16912.4 7078.8 -0.35 -0.36 2.39 6 60.00 22566.7 22567.1 9551.1 -0.22 -0.21 2.36 7 75.00 28239.6 28238.5 11886.6 -0.06 -0.06 2.38 8 100.00 37739.5 37738.8 16128.9 0.21 0.22 2.34 9 125.00 47296.0 47293.1 20464.6 0.50 0.50 2.31 10 150.00 56888.7 56884.0 24311.8 0.75 0.75 2.34 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4502 to 132230 e- Average count rate measured: 376 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.32 +/- 0.01 e-/ADU RON = 5.25 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.134 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.75/-0.47 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay