*** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 08 Sep 2001 16:59:42 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 08 Sep 2001 17:00:19 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010908 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.57 stddev = 2.27 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_010908 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1915.5 1914.1 798.0 0.36 0.34 2.40 2 10.00 3778.6 3778.8 1557.8 -0.31 -0.29 2.43 3 20.00 7517.2 7518.7 3108.0 -0.49 -0.46 2.42 4 30.00 11266.3 11267.0 4804.0 -0.46 -0.45 2.35 5 45.00 16901.7 16903.2 7215.7 -0.36 -0.36 2.34 6 60.00 22563.1 22561.1 9626.1 -0.20 -0.21 2.34 7 75.00 28239.1 28239.2 12031.6 -0.05 -0.06 2.35 8 100.00 37752.3 37749.9 16199.5 0.24 0.22 2.33 9 125.00 47309.7 47309.3 20169.3 0.50 0.50 2.35 10 150.00 56920.1 56917.2 24699.9 0.78 0.76 2.30 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4430 to 131691 e- Average count rate measured: 376 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.31 +/- 0.01 e-/ADU RON = 5.24 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.069 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.77/-0.48 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay