*** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 30 Aug 2001 14:04:25 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 30 Aug 2001 14:05:11 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010830 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.56 stddev = 2.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_010830 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1930.1 1931.3 814.2 0.30 0.33 2.37 2 10.00 3800.2 3798.9 1589.5 -0.21 -0.25 2.39 3 20.00 7540.2 7540.7 3212.7 -0.46 -0.46 2.35 4 30.00 11290.1 11291.9 4763.8 -0.46 -0.45 2.37 5 45.00 16932.5 16933.4 7151.4 -0.36 -0.35 2.37 6 60.00 22593.3 22593.3 9571.1 -0.23 -0.22 2.36 7 75.00 28283.0 28279.3 11934.9 -0.05 -0.05 2.37 8 100.00 37792.6 37794.0 16123.0 0.21 0.22 2.34 9 125.00 47373.3 47363.3 20464.4 0.51 0.50 2.31 10 150.00 56976.0 56969.3 24293.8 0.75 0.75 2.35 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4502 to 132852 e- Average count rate measured: 377 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.33 +/- 0.01 e-/ADU RON = 5.27 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.109 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.75/-0.46 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay