*** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 23 Aug 2001 13:41:32 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Th, 23 Aug 2001 13:42:15 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010823 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.39 stddev = 2.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_010823 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1952.5 1954.4 812.3 0.30 0.31 2.40 2 10.00 3861.9 3862.3 1595.9 -0.20 -0.23 2.42 3 20.00 7681.1 7681.2 3204.7 -0.45 -0.47 2.40 4 30.00 11507.3 11510.4 4800.6 -0.48 -0.45 2.40 5 45.00 17266.0 17266.8 7239.7 -0.38 -0.38 2.38 6 60.00 23050.1 23050.7 9799.2 -0.22 -0.22 2.35 7 75.00 28856.3 28853.2 12312.3 -0.05 -0.06 2.34 8 100.00 38570.8 38568.2 16422.8 0.22 0.22 2.35 9 125.00 48342.3 48342.9 20753.8 0.50 0.51 2.33 10 150.00 58157.5 58153.9 24969.6 0.76 0.76 2.33 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4537 to 135084 e- Average count rate measured: 385 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.32 +/- 0.01 e-/ADU RON = 5.24 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.063 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.76/-0.47 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay