*** MIDAS logfile (vers. 01FEBpl1.1) *** Su, 29 Jul 2001 15:59:01 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Su, 29 Jul 2001 15:59:43 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010729 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.16 stddev = 2.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_010729 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1926.9 1927.5 803.4 0.34 0.34 2.40 2 10.00 3788.0 3787.9 1579.9 -0.26 -0.28 2.40 3 20.00 7517.5 7518.4 3103.8 -0.47 -0.47 2.42 4 30.00 11257.4 11259.1 4661.3 -0.45 -0.44 2.42 5 45.00 16882.3 16882.0 7112.8 -0.35 -0.35 2.37 6 60.00 22526.6 22526.2 9469.3 -0.21 -0.21 2.38 7 75.00 28192.9 28192.6 12017.7 -0.05 -0.05 2.35 8 100.00 37677.9 37674.3 16216.9 0.22 0.21 2.32 9 125.00 47208.5 47212.1 20259.8 0.48 0.49 2.33 10 150.00 56794.7 56789.9 24543.4 0.75 0.75 2.31 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4450 to 131148 e- Average count rate measured: 376 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.31 +/- 0.01 e-/ADU RON = 5.22 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.115 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.75/-0.47 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay