*** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 14 Jul 2001 18:14:49 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Sa, 14 Jul 2001 18:15:24 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010714 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 584.19 stddev = 2.27 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_010714 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1904.9 1902.9 793.1 0.33 0.31 2.40 2 10.00 3766.2 3766.9 1553.6 -0.25 -0.20 2.42 3 20.00 7492.0 7492.6 3129.9 -0.49 -0.48 2.39 4 30.00 11230.4 11232.2 4716.6 -0.47 -0.45 2.38 5 45.00 16850.5 16852.4 7083.2 -0.37 -0.37 2.38 6 60.00 22496.6 22499.0 9442.4 -0.21 -0.21 2.38 7 75.00 28152.7 28151.6 12148.4 -0.08 -0.09 2.32 8 100.00 37655.0 37655.9 16574.8 0.26 0.24 2.27 9 125.00 47163.9 47161.3 20220.2 0.47 0.45 2.33 10 150.00 56789.0 56786.0 24466.8 0.82 0.80 2.32 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4390 to 130941 e- Average count rate measured: 375 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.31 +/- 0.02 e-/ADU RON = 5.23 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.055 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.81/-0.49 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay