*** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 06 Jul 2001 14:37:21 Page 1 *** MIDAS logfile (vers. 01FEBpl1.1) *** Fr, 06 Jul 2001 14:38:00 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#36 TAKEN ON 010706 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 585.56 stddev = 2.26 There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_36_010706 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 5.00 1927.3 1928.3 794.3 0.31 0.32 2.43 2 10.00 3811.3 3810.9 1577.4 -0.20 -0.23 2.42 3 20.00 7577.6 7578.5 3192.0 -0.48 -0.48 2.37 4 30.00 11357.2 11357.5 4763.5 -0.46 -0.46 2.38 5 45.00 17040.0 17041.3 7150.3 -0.36 -0.36 2.38 6 60.00 22747.9 22744.4 9489.4 -0.20 -0.22 2.40 7 75.00 28468.6 28471.0 12081.6 -0.06 -0.06 2.36 8 100.00 38059.4 38061.2 16426.2 0.22 0.23 2.32 9 125.00 47688.1 47691.3 20508.6 0.48 0.48 2.33 10 150.00 57386.3 57384.7 24408.8 0.77 0.76 2.35 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4493 to 133736 e- Average count rate measured: 380 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.33 +/- 0.01 e-/ADU RON = 5.26 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.064 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.77/-0.48 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay