*** MIDAS logfile (05SEPpl1.2) *** Mo, 29 Oct 2007 15:42:57 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 29 Oct 2007 15:43:11 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rD2 TAKEN ON 071029 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 334.39 stddev = 5.30 FIERA temperature = 286.4 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_rD2_071029 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.06 1432.7 1432.6 1171.9 -0.14 -0.09 1.22 2 2.12 2836.5 2836.9 2548.5 0.26 0.31 1.11 3 4.25 5611.1 5611.4 4543.5 -0.07 -0.07 1.23 4 6.38 8399.4 8398.4 6670.2 -0.04 -0.05 1.26 5 9.57 12580.5 12579.7 10002.0 -0.01 -0.03 1.26 6 12.76 16771.7 16772.3 13355.2 0.05 0.05 1.26 7 15.95 20952.0 20952.4 16637.0 0.05 0.03 1.26 8 21.27 27920.0 27919.3 21852.1 0.04 0.02 1.28 9 26.59 34873.5 34874.0 26953.7 -0.01 -0.03 1.29 10 31.91 41791.4 41791.8 32038.5 -0.13 -0.14 1.30 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 1873 to 54627 e- Average count rate measured: 1310 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.31 +/- 0.01 e-/ADU RON = 6.93 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.036 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.29/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay