*** MIDAS logfile (05SEPpl1.2) *** Mo, 29 Oct 2007 15:42:37 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 29 Oct 2007 15:42:52 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rC2 TAKEN ON 071029 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 308.12 stddev = 4.98 FIERA temperature = 286.4 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_rC2_071029 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.06 1684.6 1684.5 1436.8 -0.11 -0.14 1.17 2 2.12 3251.9 3252.5 2757.3 0.23 0.25 1.18 3 4.25 6352.5 6353.2 5230.1 -0.08 -0.07 1.21 4 6.38 9468.7 9467.9 7726.1 -0.04 -0.04 1.23 5 9.57 14141.5 14141.7 11563.8 -0.00 -0.00 1.22 6 12.76 18825.6 18826.1 15227.0 0.07 0.07 1.24 7 15.95 23497.5 23498.1 19029.3 0.06 0.06 1.23 8 21.27 31282.3 31280.8 25299.3 0.04 0.04 1.24 9 26.59 39045.7 39046.8 30886.2 -0.02 -0.02 1.26 10 31.91 46767.3 46767.0 37392.0 -0.15 -0.15 1.25 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 2121 to 58876 e- Average count rate measured: 1463 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.26 +/- 0.01 e-/ADU RON = 6.27 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.094 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.24/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay