*** MIDAS logfile (05SEPpl1.2) *** Mo, 16 Oct 2006 15:30:30 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 16 Oct 2006 15:31:25 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rC2 TAKEN ON 061016 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 322.13 stddev = 5.29 FIERA temperature = 288.1 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_rC2_061016 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.06 1712.4 1713.3 1428.0 -0.10 -0.09 1.20 2 2.12 3366.5 3365.1 2764.6 0.20 0.17 1.22 3 4.25 6641.3 6639.9 5425.5 -0.10 -0.12 1.22 4 6.38 9931.8 9932.2 8071.6 -0.05 -0.05 1.23 5 9.57 14867.3 14868.2 12009.9 -0.01 -0.01 1.24 6 12.76 19819.6 19818.2 16063.6 0.08 0.08 1.23 7 15.95 24754.0 24753.5 19828.3 0.08 0.09 1.25 8 21.28 32980.9 32976.8 26285.3 0.06 0.07 1.25 9 26.59 41178.5 41178.4 32345.8 -0.00 0.00 1.27 10 31.91 49323.8 49328.4 38646.7 -0.15 -0.14 1.28 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 2190 to 63060 e- Average count rate measured: 1546 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.28 +/- 0.01 e-/ADU RON = 6.76 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.049 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.18/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay