*** MIDAS logfile (03SEPpl1.2) *** Fr, 14 Oct 2005 16:54:56 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 14 Oct 2005 16:55:59 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rC2 TAKEN ON 051014 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 346.52 stddev = 3.90 FIERA temperature = 291.5 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_rC2_051014 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.00 963.9 963.6 912.9 0.03 0.06 1.06 2 2.00 1857.2 1856.3 1537.4 -0.06 -0.05 1.21 3 4.00 3643.8 3643.7 2987.7 -0.07 -0.05 1.22 4 6.00 5431.4 5430.6 4493.4 -0.06 -0.07 1.21 5 9.00 8112.5 8112.7 6612.3 -0.04 -0.04 1.23 6 12.00 10797.0 10796.6 8955.3 -0.02 -0.02 1.21 7 15.00 13481.2 13480.4 10973.5 0.01 -0.00 1.23 8 20.00 17959.2 17958.3 14546.9 0.05 0.04 1.23 9 25.00 22435.2 22435.6 18230.6 0.07 0.06 1.23 10 30.00 26912.5 26911.8 22081.8 0.08 0.07 1.22 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 1185 to 33079 e- Average count rate measured: 894 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.23 +/- 0.01 e-/ADU RON = 4.80 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.079 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.07 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay