*** MIDAS logfile (05SEPpl1.2) *** Fr, 06 Oct 2006 14:41:34 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 06 Oct 2006 14:42:26 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rB2 TAKEN ON 061006 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 349.28 stddev = 4.81 FIERA temperature = 288.0 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_rB2_061006 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.06 2064.0 2063.4 1835.9 0.00 -0.01 1.12 2 2.12 3975.0 3974.4 3154.8 0.14 0.13 1.26 3 4.25 7764.2 7762.9 6111.5 -0.18 -0.18 1.27 4 6.38 11573.5 11573.2 9113.3 -0.12 -0.11 1.27 5 9.57 17288.1 17288.6 13563.5 -0.06 -0.05 1.27 6 12.76 23030.2 23031.4 18119.3 0.08 0.08 1.27 7 15.95 28753.8 28754.7 22446.5 0.10 0.11 1.28 8 21.27 38289.1 38287.9 29637.4 0.11 0.11 1.29 9 26.59 47790.0 47791.3 36168.5 0.05 0.05 1.32 10 31.91 57222.4 57222.7 42679.7 -0.12 -0.11 1.34 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 2759 to 76500 e- Average count rate measured: 1790 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.34 +/- 0.01 e-/ADU RON = 6.44 +/- 0.06 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.093 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay