*** MIDAS logfile (03SEPpl1.2) *** Fr, 14 Oct 2005 16:53:49 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 14 Oct 2005 16:54:51 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rB2 TAKEN ON 051014 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 359.83 stddev = 4.04 FIERA temperature = 291.5 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_rB2_051014 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.00 1110.5 1110.2 895.7 0.12 0.08 1.24 2 2.00 2129.4 2128.7 1696.9 -0.10 -0.11 1.25 3 4.00 4169.0 4168.7 3276.7 -0.14 -0.13 1.27 4 6.00 6210.3 6209.5 4991.6 -0.12 -0.13 1.24 5 9.00 9272.7 9273.6 7296.6 -0.10 -0.09 1.27 6 12.00 12342.2 12342.5 10987.9 -0.04 -0.03 1.12 7 15.00 15412.2 15411.5 12623.4 0.01 0.01 1.22 8 20.00 20536.9 20536.1 16529.6 0.08 0.09 1.24 9 25.00 25658.6 25659.5 20058.6 0.13 0.13 1.28 10 30.00 30783.9 30784.5 23947.4 0.16 0.17 1.29 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 1419 to 39344 e- Average count rate measured: 1021 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.28 +/- 0.02 e-/ADU RON = 5.16 +/- 0.10 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.088 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.13 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay