*** MIDAS logfile (03SEPpl1.2) *** Fr, 14 Oct 2005 17:12:11 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 14 Oct 2005 17:13:11 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rD2 TAKEN ON 051014 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 379.64 stddev = 9.21 FIERA temperature = 291.6 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_rD2_051014 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.00 773.4 773.4 659.7 0.01 0.00 1.17 2 2.00 1527.2 1526.7 1215.0 -0.04 -0.05 1.26 3 4.00 3036.6 3036.3 2341.8 -0.01 -0.01 1.30 4 6.00 4545.6 4545.7 3462.0 -0.01 -0.01 1.31 5 9.00 6808.0 6807.5 5153.5 -0.03 -0.03 1.32 6 12.00 9072.8 9072.1 6762.4 -0.00 -0.01 1.34 7 15.00 11337.3 11337.3 8566.4 0.01 0.01 1.32 8 20.00 15112.2 15112.3 11271.1 0.02 0.02 1.34 9 25.00 18887.7 18887.8 13901.9 0.03 0.03 1.36 10 30.00 22662.5 22662.2 16676.9 0.03 0.04 1.36 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 1056 to 30945 e- Average count rate measured: 754 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.37 +/- 0.01 e-/ADU RON = 12.58 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.027 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.04/-0.05 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay