*** MIDAS logfile (03SEPpl1.2) *** Fr, 04 Nov 2005 19:10:50 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 04 Nov 2005 19:12:00 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rC2 TAKEN ON 051104 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 347.46 stddev = 9.31 FIERA temperature = 291.7 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_rC2_051104 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.00 895.6 895.2 760.7 0.10 0.07 1.18 2 2.00 1724.2 1723.4 1410.4 -0.09 -0.11 1.22 3 4.00 3386.3 3386.3 2662.3 -0.07 -0.06 1.27 4 6.00 5048.1 5047.8 4012.5 -0.05 -0.05 1.26 5 9.00 7540.1 7540.2 5753.9 -0.05 -0.05 1.31 6 12.00 10036.9 10037.4 7666.0 -0.01 0.00 1.31 7 15.00 12533.0 12533.2 9584.8 0.02 0.03 1.31 8 20.00 16693.3 16693.6 12474.4 0.04 0.05 1.34 9 25.00 20852.0 20852.3 15799.9 0.05 0.06 1.32 10 30.00 25010.0 25009.8 18841.9 0.05 0.06 1.33 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 1197 to 33434 e- Average count rate measured: 831 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.34 +/- 0.01 e-/ADU RON = 12.45 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.080 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay