*** MIDAS logfile (03SEPpl1.2) *** Fr, 14 Oct 2005 17:11:04 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 14 Oct 2005 17:12:05 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rC2 TAKEN ON 051014 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 348.78 stddev = 9.13 FIERA temperature = 291.6 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_rC2_051014 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.00 896.0 895.8 763.5 0.06 0.04 1.17 2 2.00 1726.6 1725.5 1390.9 -0.05 -0.09 1.24 3 4.00 3390.0 3389.8 2851.9 -0.06 -0.05 1.19 4 6.00 5053.4 5053.3 3918.5 -0.06 -0.06 1.29 5 9.00 7549.3 7549.1 5768.5 -0.05 -0.05 1.31 6 12.00 10049.2 10049.1 7686.0 -0.00 0.00 1.31 7 15.00 12548.0 12548.8 9499.1 0.01 0.03 1.32 8 20.00 16715.0 16715.3 12559.4 0.05 0.05 1.33 9 25.00 20880.3 20881.1 15716.4 0.06 0.07 1.33 10 30.00 25043.4 25043.0 18847.9 0.06 0.06 1.33 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 1202 to 33609 e- Average count rate measured: 832 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.34 +/- 0.01 e-/ADU RON = 12.25 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.078 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.06/-0.08 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay