*** MIDAS logfile (03SEPpl1.2) *** We, 29 Jun 2005 22:19:22 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** We, 29 Jun 2005 22:20:25 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rC2 TAKEN ON 050629 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 339.95 stddev = 13.76 FIERA temperature = 290.8 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_rC2_050629 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 1.00 918.5 918.2 897.4 0.04 0.09 1.02 2 2.00 1764.7 1765.2 1545.6 -0.11 -0.07 1.14 3 4.00 3460.0 3459.6 2821.6 -0.07 -0.07 1.23 4 6.00 5155.4 5154.6 4108.8 -0.05 -0.05 1.25 5 9.00 7697.2 7697.1 6042.1 -0.04 -0.05 1.27 6 12.00 10244.5 10243.6 7908.5 0.01 -0.00 1.30 7 15.00 12789.5 12790.9 9919.8 0.03 0.02 1.29 8 20.00 17033.5 17032.6 12955.9 0.06 0.04 1.31 9 25.00 21276.8 21276.5 16250.8 0.07 0.05 1.31 10 30.00 25516.6 25516.1 19137.6 0.06 0.05 1.33 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 1231 to 34215 e- Average count rate measured: 848 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.34 +/- 0.01 e-/ADU RON = 18.45 +/- 0.08 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.086 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay