*** MIDAS logfile (05SEPpl1.2) *** Fr, 24 Feb 2006 14:02:08 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 24 Feb 2006 14:03:27 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rA1 TAKEN ON 060224 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 668.04 stddev = 14.26 FIERA temperature = 289.9 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_rA1_060224 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.25 1826.2 1826.4 1610.2 -0.12 -0.11 1.13 2 8.51 3627.5 3627.1 2987.4 0.13 0.12 1.21 3 17.02 7213.9 7214.1 5679.1 0.05 0.05 1.27 4 25.53 10807.2 10807.2 8262.9 0.08 0.08 1.31 5 38.30 16202.8 16201.5 12027.5 0.14 0.13 1.35 6 51.06 21586.6 21587.3 15901.0 0.11 0.12 1.36 7 63.83 26976.4 26976.9 19191.6 0.12 0.12 1.41 8 85.10 35929.2 35928.8 24536.8 0.05 0.04 1.46 9 106.38 44812.8 44813.7 29623.4 -0.16 -0.15 1.51 10 127.66 53631.3 53631.7 33935.1 -0.41 -0.41 1.58 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 2893 to 84962 e- Average count rate measured: 422 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.58 +/- 0.04 e-/ADU RON = 22.59 +/- 0.52 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.085 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.41 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay