*** MIDAS logfile (03SEPpl1.2) *** Fr, 14 Oct 2005 15:49:29 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 14 Oct 2005 15:50:46 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#rA1 TAKEN ON 051014 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 592.94 stddev = 15.54 FIERA temperature = 291.5 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_rA1_051014 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.00 951.7 951.7 997.2 0.03 0.01 0.95 2 8.00 1878.3 1878.5 1716.4 0.00 0.00 1.09 3 16.00 3728.2 3727.8 3157.2 -0.11 -0.12 1.18 4 24.00 5587.2 5587.3 4553.2 0.02 0.02 1.23 5 36.00 8365.3 8365.1 6593.1 -0.02 -0.02 1.27 6 48.00 11151.7 11151.8 8664.4 0.04 0.04 1.29 7 60.00 13932.7 13932.5 10746.1 0.03 0.03 1.30 8 80.00 18564.0 18564.2 13866.0 0.00 0.01 1.34 9 100.00 23201.0 23201.8 16931.6 0.01 0.02 1.37 10 120.00 27831.0 27830.3 20065.6 -0.01 -0.00 1.39 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 1339 to 39172 e- Average count rate measured: 232 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.41 +/- 0.01 e-/ADU RON = 21.88 +/- 0.22 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.107 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.04/-0.11 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay