*** MIDAS logfile (05SEPpl1.2) *** Mo, 29 Oct 2007 12:27:37 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 29 Oct 2007 12:27:51 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 071029 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 606.49 stddev = 3.39 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_071029 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1919.4 1920.3 699.4 0.03 0.06 2.74 2 8.41 3767.8 3765.2 1370.2 0.02 -0.05 2.75 3 16.81 7457.2 7459.1 2697.7 -0.08 -0.05 2.76 4 25.21 11146.3 11146.2 4026.3 -0.12 -0.11 2.77 5 37.82 16695.7 16691.4 6057.7 -0.07 -0.09 2.76 6 50.42 22247.8 22244.1 7928.6 -0.02 -0.03 2.81 7 63.03 27807.6 27807.2 10249.0 0.03 0.03 2.71 8 84.04 37073.2 37073.8 13180.5 0.08 0.08 2.81 9 105.05 46327.3 46324.6 16486.4 0.08 0.08 2.81 10 126.05 55563.3 55566.5 19773.3 0.06 0.07 2.81 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 5402 to 156359 e- Average count rate measured: 440 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.81 +/- 0.02 e-/ADU RON = 9.53 +/- 0.06 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.151 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.11 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay