*** MIDAS logfile (05SEPpl1.2) *** Th, 18 Oct 2007 17:36:42 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 18 Oct 2007 17:36:56 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 071018 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 606.75 stddev = 3.46 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_071018 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1935.4 1935.1 712.5 0.05 0.05 2.72 2 8.41 3796.8 3796.5 1391.7 -0.01 -0.01 2.73 3 16.81 7515.3 7514.3 2700.5 -0.10 -0.10 2.78 4 25.21 11236.4 11235.3 4124.3 -0.10 -0.11 2.72 5 37.82 16826.7 16827.6 6126.0 -0.08 -0.07 2.75 6 50.42 22423.6 22423.5 8202.4 -0.02 -0.02 2.73 7 63.03 28031.7 28030.3 10067.8 0.04 0.03 2.78 8 84.04 37368.9 37371.3 13487.8 0.08 0.09 2.77 9 105.05 46691.3 46690.2 16698.6 0.07 0.07 2.80 10 126.05 56013.6 56010.0 20040.0 0.08 0.07 2.80 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 5417 to 156779 e- Average count rate measured: 443 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.80 +/- 0.01 e-/ADU RON = 9.70 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.151 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.11 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay