*** MIDAS logfile (05SEPpl1.2) *** Su, 14 Oct 2007 13:32:48 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 14 Oct 2007 13:33:02 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 071014 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 605.77 stddev = 3.41 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_071014 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 4.21 1930.9 1932.3 715.3 0.05 0.05 2.70 2 8.41 3786.6 3787.4 1365.3 -0.00 -0.01 2.77 3 16.81 7492.4 7493.5 2733.1 -0.10 -0.10 2.74 4 25.21 11203.2 11201.7 4175.7 -0.09 -0.11 2.68 5 37.82 16776.0 16776.1 6093.3 -0.07 -0.07 2.75 6 50.42 22353.1 22355.0 8152.9 -0.02 -0.01 2.74 7 63.03 27940.9 27943.5 10123.4 0.03 0.04 2.76 8 84.04 37250.2 37246.1 13451.2 0.08 0.07 2.77 9 105.05 46541.9 46539.2 16536.3 0.07 0.07 2.81 10 126.05 55822.2 55822.3 19936.7 0.06 0.06 2.80 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 5427 to 156833 e- Average count rate measured: 442 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.81 +/- 0.01 e-/ADU RON = 9.59 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.157 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.11 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay