*** MIDAS logfile (05SEPpl1.2) *** Sa, 30 Jun 2007 17:00:51 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 30 Jun 2007 17:01:05 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#31 TAKEN ON 070630 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 605.49 stddev = 3.45 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_31_070630 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 -------- --------- --------- --------- --------- --------- --------- 1 4.21 1979.6 1981.1 730.7 0.05 0.08 2 8.41 3881.5 3879.4 1410.5 -0.02 -0.09 3 16.81 7682.3 7682.9 2813.2 -0.10 -0.09 4 25.21 11486.4 11484.8 4172.8 -0.10 -0.10 5 37.82 17200.0 17196.2 6257.2 -0.08 -0.09 6 50.42 22920.4 22919.4 8344.3 -0.02 -0.01 7 63.03 28651.0 28649.7 10371.9 0.04 0.05 8 84.04 38196.3 38192.8 13768.7 0.08 0.09 9 105.05 47721.0 47720.2 17283.2 0.07 0.09 10 126.05 57245.8 57242.2 20786.3 0.07 0.08 -------- --------- --------- --------- --------- --------- --------- Sequence el_adu1 -------- --------- 1 2.71 2 2.75 3 2.73 4 2.75 5 2.75 6 2.75 7 2.76 8 2.77 9 2.76 10 2.75 -------- --------- Dynamic range explored: from 5470 to 158112 e- Average count rate measured: 453 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.76 +/- 0.00 e-/ADU RON = 9.52 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.156 sec *** MIDAS logfile (05SEPpl1.2) *** Sa, 30 Jun 2007 17:01:05 Page 3 LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.09/-0.10 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay